The CB15 provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.

Mounting Note: This accessory may ship in a gray plastic Snaptrack tray. Please note that this tray no longer supports the DIN rail clips. For DIN rail installations, use the included LJSnap2D adapters, which are fully compatible with TKAD clips.

For more information, see the CB15 Datasheet.

The LJTick-InAmp 2, revision 2, (LJTick-InAmp 2) is EoL & NRND (End Of Life and Not Recommended for New Designs).  It has been replaced by a newer, and simpler, InAmp 3 (Rev 3).

The LabJack Tick-InAmp 2 (LJTIA 2) signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended. The LJTIA 2 has switches to choose from 5 gain settings (x1, x11, x51, x201, or custom) and two output voltage offsets. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T4, and T7.

The LJTIA 2 datasheet has more information. 

Clip used to mount a LabJack device to a DIN rail. Simply attach this clip to the backside of a LabJack device, and clip it to any DIN rail. This clip is manufactured by TE Connectivity, p/n TKAD, or 6-1437661-4.

We recommend two TKAD mounting clips per U6, UE9, T7, and T8, because these LabJack devices have mounting locations for two clips. As shown in the image, the U3 and T4 only has one spot for a clip.

Our DIN Rail clips will ship with a 3d printed mounting adapter that will allow you to mount our accessory boards to a DIN rail. They will take the place of the snaptrack, and will be able to snap directly to the PCB.  

More details, including CAD drawings, are available from TE Connectivity.

General purpose dual instrumentation amplifier. Often used in conjunction with the LabJack U12 to provide analog input gain. Operates from a single 5 volt supply and provides a ±15 volt supply and a 4.096 volt reference voltage. Analog input range is ±10 volts. The gain of each channel is set to 1, 10, 100, or 1000 via digital I/O or jumper wires.

For more information, see the EI-1040 Dual Instrumentation Amplifier Datasheet.

End Of Life (EOL) Notice

Limited Availability: The EI-1040 dual instrumentation amplifier, manufactured by Electronic Innovations Corporation and sold by LabJack, is at the end of production. Estimated time of NLA (no longer available) is Spring 2023.

• Analog Inputs (4): ±10V range and 12-bit resolution.
• Flex Lines (8): 0-2.5V analog input or 3.3V Digital IO.
• Digital IO (16): 8 dedicated Digital IO and 8 Flex lines (above)
• Analog Outputs (2): 0-5V and 10-bit resolution
• Digital Features: Counters, PWM, frequency, I2C and more
• Sampling Rate: Up to 50k samples per second.
• USB & Ethernet: Controlled through USB or Ethernet.
• Onboard Scripting: Run Lua scripts right on the device.
• Easy to use API: Works with the LabJack Modbus (LJM) library.

Choose the LabJack T7 for ultimate power and data acquisition flexibility. With 16-bit analog inputs, the option to use USB or Ethernet, and numerous built-in firmware features, the T7 can help you accomplish nearly any DAQ need. The LabJack T7 also has 2 analog outputs (12-bit), 23 digital I/O, and up to 10 digital counters/timers.

All the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC. The T7-Pro also includes a real time clock (RTC) and 4GB MicroSD card for standalone datalogging.

With 14 instrumentation amplified analog inputs, software selectable gain settings, dozens of digital I/O features, and a Modbus TCP front-end, the T7 is our most versatile multifunction DAQ platform. Common applications include laboratory research, industrial control and monitoring, automated testing, and prototype development. Additionally, T7 devices are capable of stand-alone operation by running Lua scripts.

The LabJack T8 is the new flagship T-Series device adding powerful features including:

• 8x isolated analog inputs (AIN) with simultaneous sampling.
• ±1 kV AIN isolation channel-to-channel and channel-to-ground.
• Top performance for thermocouples, load cells, bridge circuits, and more.
• 8x 24-bit ΣΔ ADCs (up to 40k samples/s/ch).
• 10+ AIN voltage ranges: ±11V, to ±0.075V.
• 2 analog outputs (16-bit, 0-10V) with 20 mA drive.
• 20 digital I/O similar to the T7.
• Lua scripts are faster with 5x the code space than the T7.
• 3.3V fixed voltage outputs for excitation.
• Supported by LJM. LabJack's free, 3rd generation, cross-platform driver/library/API for simplifying device communication.
• Industrial temperature range (-40 to +85C).
• USB & Ethernet.
• Built-in Power over Ethernet (PoE), or power through USB connection.

USB DAQ device with 8 analog inputs(12-bit), 2 analog outputs(10-bit), 20 digital I/O, and a 32-bit counter.