« Close

Datasheets and User Guides

App Notes

Software & Driver

 

Network Settings

After selecting devices, a tab named "Network Settings" is available that lets users read and configure Ethernet and WiFi settings without the hassles of knowing low-level device details.
For more details on network settings see the network settings app note.

Key Features
  • Convert WIFI_STATUS integers into the appropriate string values for interpretation
  • Easily switch between using DHCP and manually setting IP settings
  • Set up and save Wifi settings easily on using the Wifi tab

Ethernet Settings
LabJack USB/Ethernet/802.11b/g WiFi DAQ Device Control Program Network Configuration
Wifi Settings
LabJack USB/Ethernet/802.11b/g WiFi DAQ Device Control Program Network Configuration
Supported Devices

7 comments

I receive the following error message when I try to manually set the IP address of the T7 using Kipling:

"TypeError: Cannot call method 'split' of undefined"

How can I resolve this issue?

Thanks

 

 

I've replicated your error and I am working on fixing the problem. Thank you for the error report!

Is there a solution yet??

Yeah...

If you use Kipling R-1.0.14...ie the previous version of Kipling....it worked for me, anyway...

Al

 

I receive "TypeError: Cannot call method 'split' of undefined"  after change from DHCP to Manual. How can i solve the issue?

Hello,

Also having this issue. Any fix yet?

 

Mike

This is referring to the "split" error in Kipling 3.0.6 when trying to disable DHCP and set a static IP:

"TypeError: Cannot call method 'split' of undefined"

This issue will be fixed in the next release of Kipling which is scheduled for late February (due to a major overhaul of core code).

One workaround is to use a programming language.  Many of our programming archives include an example to write Ethernet configuration.  Note that if you write to _DEFAULT registers, you need to power-cycle the T7 for them to take effect.

Another workaround is to use the Register Matrix tab in Kipling.  Set Tag=Ethernet, and then add 4 registers to the Watch/Config list:  ETHERNET_IP, ETHERNET_DHCP_ENABLE, ETHERNET_IP_DEFAULT, and ETHERNET_DHCP_ENABLE_DEFAULT.  Set ETHERNET_DHCP_ENABLE_DEFAULT=0 to disable DHCP, and write the desired IP to ETHERNET_IP_DEFAULT.  Power-cycle the T7 and the current value registers will update.  You need to write the integer value for IP, not byte-dot, so for example 192.168.1.207 would be 3232235983.  Here is a link to a converter.