« Close

Datasheets and User Guides

App Notes

Software & Driver

 

Analog Inputs

After selecting devices, a tab named "Analog Inputs" is available that displays and controls the analog inputs and the analog input extended features.

Key Features

  • Reading AIN0 through AIN13
  • Read and write AIN_ALL registers to control range, resolution, settling time, and negative channels
  • Individually configure range, resolution, settling time, negative channels, and enabled extended features for AIN0 through AIN13
  • Individually configure each analog input for supported extended features

For more information, see Analog Inputs in the T-series Datasheet.

Standard view of Analog Inputs

LabJack USB/Ethernet/WiFi DAQ Device Control Program Analog Inputs Display

Individually configuring settings for AIN1 and AIN3

LabJack USB/Ethernet/WiFi DAQ Device Control Program Analog Inputs Configuration

Configuring AIN1 for Slope/Offset Extended Feature

LabJack USB/Ethernet/WiFi DAQ Device Control Program Analog Inputs Extended Features, Slope and Offset

For more information, see Slope/Offset in the T-series Datasheet.

Configuring AIN0 for TypeJ Thermocouple

LabJack USB/Ethernet/WiFi DAQ Device Control Program Analog Inputs Extended Features, Thermocouples

For more information, see the Thermocouple extended feature in the T-series Datasheet.
There is also the Thermocouple App Note, as well as the Thermocouple App Note specific to the T7.

Supported Devices