2.3.7 - eReadAddressArray | LabJack
« Close

Datasheets and User Guides

App Notes

Software & Driver


2.3.7 - eReadAddressArray

Read consecutive values, specified by an address and type.


                      int Handle,
                      int Address,
                      int Type,
                      int NumValues,
                      double * aValues,
                      int * ErrorAddress)


Handle [in]
A device handle. The handle is a connection ID for an active device. Generate a handle with LJM_Open or LJM_OpenS.
Address [in]
The address that specifies the Modbus register(s) to read. Addresses can be found throughout the device datasheet or in the Modbus Map.
Type [in]
The data type of the value(s):
Type LJM Constant Name LJM Constant Value
unsigned 16-bit integer LJM_UINT16 0
unsigned 32-bit integer LJM_UINT32 1
signed 32-bit integer LJM_INT32 2
floating point 32-bit LJM_FLOAT32 3
NumValues [in]
The number of consecutive values to read.
aValues [out]
An array of values to be transferred from the device. The array size should be equal to NumValues. Each value will be converted according to Type.
ErrorAddress [out]
If error, the address responsible for causing an error.


LJM errorcodes or 0 for no error.


The Name version of this function is LJM_eReadNameArray.

If NumValues is large enough, these functions will automatically split reads into multiple packets based on the current device's effective data packet size. Using both non-buffer and buffer registers in one function call is not supported.


[C/C++] Read analog inputs 0 through 7

int LJMError;
int errorAddress;
double newValues[8];

// handle comes from LJM_Open()
LJMError = LJM_eReadAddressArray(handle, 0, LJM_FLOAT32, 8, newValues, &errorAddress);
if (LJMError != LJME_NOERROR) {
    // Deal with error


I am not finding this function in vb.net. I'm using vb 2010 express. Is it not there?

My LJM_LIBRARY_VERSION reads as 1.0703