Skip to main content
Skip table of contents

2.13.2 - RB12 Relay Board [UE9 Datasheet]

The RB12 relay board provides a convenient interface for the UE9 to industry standard digital I/O modules, allowing electricians, engineers, and other qualified individuals, to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules. Output or input types of digital I/O modules can be used. The RB12 is designed to accept G4 series digital I/O modules from Opto22, and compatible modules from other manufacturers such as the G5 series from Grayhill. Output modules are available with voltage ratings up to 200 VDC or 280 VAC, and current ratings up to 3.5 amps.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.