- WaitShort: IOType=5 [U6 Datasheet] | LabJack
« Close

Datasheets and User Guides

App Notes

Software & Driver - WaitShort: IOType=5 [U6 Datasheet]

WaitShort, 2 Command Bytes: 
0 IOType=5
1 Time (* 64 us)
0 Response Bytes: 

This IOType provides a way to add a delay during execution of the Feedback function. The typical use would be putting this IOType in between IOTypes that set a digital output line high and low, thus providing a simple way to create a pulse. Note that this IOType uses the same internal timer as stream mode, so cannot be used while streaming.

  • Time: This value (0-255) is multiplied by 64 microseconds to determine the delay.