Skip to main content
Skip table of contents

BitStateWrite: IOType=11

BitStateWrite, 2 Command Bytes: 

0

IOType=11

1

Bits 0-4: IONumber

 

Bit 7: State;

0 Response Bytes: 

 

 

This IOType writes the state of a single bit of digital I/O. The direction of the specified line is forced to output.

  • IO Number: 0-7=FIO, 8-15=EIO, or 16-19=CIO.

  • State: 1=High, 0=Low.

Example

PY
# BitStateWrite Feedback command
# write a single bit of digital I/O.  The direction of the 
# specified line is forced to output.

import u3
d = u3.U3()
d.debug = True
d.getFeedback(u3.BitStateWrite(IONumber = 5, State = 0))
# Sent:  [0xb, 0xf8, 0x2, 0x0, 0x10, 0x0, 0x0, 0xb, 0x5, 0x0]
# Response:  [0xfa, 0xf8, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0]
# [None]
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.