2.0 Installation [T-Series Datasheet] | LabJack
« Close

Datasheets and User Guides

App Notes

Software & Driver


2.0 Installation [T-Series Datasheet]

LabJack provides simple installation packages which will load the drivers and software necessary to get rolling with a t-series device. Follow the below isntructions to get all set up.

  1. Install the LabJack software and driver bundle based on your operating system.
  2. Connect the T4 or T7 to the local computer via USB.
  3. Proceed through any steps to add new hardware.
  4. If using Windows, Mac or Linux, open Kipling (installed with the software and driver bundle).
  5. Use the dashboard in Kipling to view analog inputs, digital I/O, DAC outputs, etc.
  6. Go to the relevant quickstart tutorial: