« Close

Datasheets and User Guides

App Notes

Software & Driver

 

1.1 Core Features [T-Series Datasheet]

T4:

 

High Voltage Analog Inputs

  • 4 dedicated high voltage analog inputs (±10V, 12-bit resolution)
  • Configurable resolution settings

Flexible I/O:

  • 8 configurable low voltage analog inputs (0-2.5V, 12-bit resolution) that can function as digital I/O lines

Digital I/O:

  • 8 dedicated digital I/O lines (EIO4-EIO7 and CIO0-CIO3)

Analog Outputs:

  • 2 Analog Outputs (10-bit, 0-5 volts)
  • Additional analog outputs are possible via the LJTick-DAC

T7:

 

Analog I/O

  • 14 Analog Inputs (16-18+ Bits Depending on Speed), expand to 84 with Mux80
  • Single-Ended Inputs (14) or Differential Inputs (7)
  • Instrumentation Amplifier Inputs
  • Software Programmable Gains of x1, x10, x100, and x1000
  • Analog Input Ranges of ±10, ±1, ±0.1, and ±0.01 Volts
  • 2 Analog Outputs (12-Bit, ~0-5 Volts)

Digital I/O

  • 23 Digital I/O
  • Supports SPI, I2C, 1-Wire and Asynchronous Serial Protocols (Master Only)
  • Supports Software or Hardware Timed Acquisition
  • Maximum Input Stream Rate of 100 kHz (Depending on Resolution)
  • Capable of Command/Response Times Less Than 1 Millisecond

Digital I/O Extended Features

  • Simple PWM Output (1-32 bit)
  • PWM Output w/ phase control
  • Pulse Output w/ phase control
  • Positive edge capture
  • Negative edge capture
  • PWM measure
  • Edge capture & compare
  • High speed counter
  • Software counter
  • Software counter w/ debounce
  • Quadrature Input
  • Easy Frequency Input

Analog Input Extended Features

  • User Defined Slope & Offset
  • Thermocouple type E, J, K, R, T, and C calculations
  • RTDs
  • Thermistors

Other highlights

  • Built-In CJC Temperature Sensor
  • Watchdog system
  • Field Upgradable Firmware
  • Programmable Startup Defaults
  • LJTick Compatible

Fixed Current Outputs

  • 200 µA
  • 10 µA