Once the stream settings are configured, this function is called to start the stream. Call the StreamConfig function before every stream start. Requires U3 hardware version 1.21 or higher.
Table 5.2.11-1. StreamStart Command Response
| Command: | |
| Byte | |
| 0 | 0xA8 |
| 1 | 0xA8 |
| Response: | |
| Byte | |
| 0 | Checksum8 |
| 1 | 0xA9 |
| 2 | Errorcode |
| 3 | 0x00 |