4.37 - WriteMem [U12 Datasheet]

Writes 4 bytes to the LabJack’s 8,192 byte nonvolatile memory at a specified address. The data is read back and verified after the write. Memory 0-511 is reserved for configuration and calibration data. Memory from 512-1023 is unused by the LabJack and available for the user (this corresponds to starting addresses from 512-1020). Memory 1024-8191 is used as a data buffer in hardware timed AI modes (burst and stream).

Execution time for this function is 20 milliseconds or less (typically 16 milliseconds in Windows).

Declaration:

long WriteMem (    long *idnum,
                   long unlocked,
                   long address,
                   long data3,
                   long data2,
                   long data1,
                   long data0 )

Parameter Description:
Returns: LabJack errorcodes or 0 for no error.
Inputs:

• *idnum – Local ID, serial number, or -1 for first found.
• unlocked – If >0, addresses 0-511 are unlocked for writing.
• address – Starting address for writing (0-8188).
• data3 – Byte for address.
• data2 – Byte for address+1.
• data1 – Byte for address+2.
• data0 – Byte for address+3.

Outputs:

• *idnum – Returns the local ID or –1 if no LabJack is found.