Read EI-1050 in SCADA | LabJack
 

Read EI-1050 in SCADA

3 posts / 0 new
Last post
tramanah
tramanah's picture
Read EI-1050 in SCADA

I am trying to read EI-1050 in SCADA INDUSOFT. Currently i do use U9 via TCP/IP, managing communication via modbus bus protocol. May i know how to establish to read EI-1050 via tcp/ip.

LabJack Support
LabJack Support's picture
The UE9 does not support EI

The UE9 does not support EI-1050 communication over Modbus. The only LabJack device that can do that is the T7. To use an EI-1050 probe with the UE9 we need to call some driver functions described here: https://labjack.com/support/datasheets/accessories/ei-1050

tramanah
tramanah's picture
Thank you, I will proceed to

Thank you, I will proceed to purchase the T7.