AIN Reading using U6 Pro | LabJack
 

AIN Reading using U6 Pro

3 posts / 0 new
Last post
BobL
boblin's picture
AIN Reading using U6 Pro

While doing the AIN reading with U6 Pro, is it OK (that it will not damage LabJack) to apply +/-10V when in 0.01V, 0.1V and 1V range? The specification mentioned there is a built-in amplifier for the AIN channels. If the gain selected for a +10V singal is 1000 for example, how would the the amplifier respond?

LabJack Support
LabJack Support's picture
Yes that is okay (no damage).

Yes that is okay (no damage).  The limits from the specs (note 8 in particular) apply regardless of what range you are using:

https://labjack.com/support/datasheets/u6/appendix-a

If you are set to the 0.01V range, a signal of >0.01V will just saturate the amp (not harmful) and return the upper limit.

 

BobL
boblin's picture
Thank you very much for the

Thank you very much for the quick respond!