U3 - HV measuring voltage

2 posts / 0 new
Last post
tdh10
tdh10's picture
U3 - HV measuring voltage

Hi LabJack, Resolution of LabJack is 10 bits which means 1024 samples on interval. That means if i use it for measure 0-10V i can measure this in steps of 0.009V and if I use it in range 0-2.4V i can measure in steps of 0.002V . Is that correct?

LabJack Support
LabJack Support's picture
Specs for the U3 can be found

Specs for the U3 can be found here: https://labjack.com/support/datasheets/u3/appendix-a

Resolution on the 0-2.44V inputs is ~600µV.