Maximum value of the analog inputs | LabJack
 
LabJack is closed November 26 and 27 for the Thanksgiving holiday.

Maximum value of the analog inputs

2 posts / 0 new
Last post
TLIN
TLIN's picture
Maximum value of the analog inputs

Hi,

I don't understand which is the maximum value for the analog inputs. In the table below it says Typical input range high voltage AIN (HV) is 10V and 3 rows below say No Damage, HV 40V. Which is the maximum voltage for the analogue input signals 10V or 40V?

Regards

File Attachment: 
LabJack Support
LabJack Support's picture
It appears you are looking at

It appears you are looking at the T4 specs:

https://labjack.com/support/datasheets/t-series/appendix-a-3-1-1-t4-general-specs

10V is the upper limit of the measurement range.  40V is the spec for max voltage the terminal can handle without sustaining damage.

10V:  Max you can measure.
10-40V:  You can't measure this but it will not hurt the channel.
>40V:  You are risking damage.