T4 Arduino Interface | LabJack
 
LabJack is closed November 26 and 27 for the Thanksgiving holiday.

T4 Arduino Interface

2 posts / 0 new
Last post
_rednax_
_rednax_'s picture
T4 Arduino Interface

To interface a Labjack T4 and an Arduino Uno, we want to use an ethernet connection and have the Arduino call Labjack functions (eReadNames, eStreamRead, etc.) like normal. However, to upload to a library to an Arduino, you need the original .h and .c files. As downloaded, the LabjackM library came only with .lib precompiled library, so using the Labjack library is currently impossible. I understand that the LabjackM library source code is most likely unavailable, but is there an alternate way to interface to a Labjack T4 through Arduino? 

LabJack Support
LabJack Support's picture
If you have Ethernet/TCP

If you have Ethernet/TCP communications available, you can use Modbus TCP to interface with the LabJack T4. Take a look at our Direct Modbus TCP page here:

https://labjack.com/support/software/examples/modbus

As for the LabJackM library, it is closed source, so source files are unavailable.