Home » Support » DAQ Devices » UD Series (U3, U6, UE9) » UD Series Software Options » Installers and Drivers
LabJack UD Setup V3.15
Printer-friendly
PDFThis is the installation for the Windows UD driver. This driver supports the U3, U6, and UE9. This install includes drivers, documentation, and the utility applications LJControlPanel and LJSelfUpgrade. August 12, 2009, 10.3 MB, Windows XP/Vista/7 32-bit.
The utility applications LJControlPanel and LJSelfUpgrade require the .NET framework available for free from Microsoft. The installer above will detect whether .NET framework V1.1 is installed, and if not will download and install it (~22 MB).
File attachment:
All Support Guides
- DAQ Devices
- UD Series
- U3
- Start with the Universal Driver
- User's Guide
- 1 - Installation on Windows
- 2 - Hardware Description
- 2.1 - USB
- 2.2 - Status LED
- 2.3 - GND and SGND
- 2.4 - VS
- 2.5 - Flexible I/O (FIO/EIO)
- 2.6 - AIN
- 2.6.1 - Channel Numbers
- 2.6.2 - Converting Binary Readings to Voltages
- 2.6.3 - Typical Analog Input Connections
- 2.6.3.1 - Signal from the LabJack
- 2.6.3.2 - Unpowered Isolated Signal
- 2.6.3.3 - Signal Powered By the LabJack
- 2.6.3.4 - Signal Powered Externally
- 2.6.3.5 - Amplifying Small Signal Voltages
- 2.6.3.6 - Signal Voltages Beyond 0-2.44 Volts (and Resistance Measurement)
- 2.6.3.7 - Measuring Current (Including 4-20 mA) with a Resistive Shunt
- 2.6.3.8 - Floating/Unconnected Inputs
- 2.6.4 - Internal Temperature Sensor
- 2.7 - DAC
- 2.8 - Digital I/O
- 2.9 - Timers/Counters
- 2.9.1 - Timer Mode Descriptions
- 2.9.1.1 - PWM Output (16-Bit, Mode 0)
- 2.9.1.2 - PWM Output (8-Bit, Mode 1)
- 2.9.1.3 - Period Measurement (32-Bit, Modes 2 & 3)
- 2.9.1.4 - Duty Cycle Measurement (Mode 4)
- 2.9.1.5 - Firmware Counter Input (Mode 5)
- 2.9.1.6 - Firmware Counter Input With Debounce (Mode 6)
- 2.9.1.7 - Frequency Output (Mode 7)
- 2.9.1.8 - Quadrature Input (Mode 8)
- 2.9.1.9 - Timer Stop Input (Mode 9)
- 2.9.1.10 - System Timer Low/High Read (Modes 10 & 11)
- 2.9.1.11 - Period Measurement (16-Bit, Modes 12 & 13)
- 2.9.2 - Timer Operation/Performance Notes
- 2.9.1 - Timer Mode Descriptions
- 2.10 - SPC (… and SCL/SDA/SCA)
- 2.11 - DB15
- 2.12 - U3-OEM
- 2.13 - Hardware Revision Notes
- 3 - Operation
- 4 - LabJackUD High-Level Driver
- 4.1 - Overview
- 4.2 - Function Reference
- 4.2.1 - ListAll()
- 4.2.2 - OpenLabJack()
- 4.2.3 - eGet() and ePut()
- 4.2.4 - eAddGoGet()
- 4.2.5 - AddRequest()
- 4.2.6 - Go()
- 4.2.7 - GoOne()
- 4.2.8 - GetResult()
- 4.2.9 - GetFirstResult() and GetNextResult()
- 4.2.10 - DoubleToStringAddress()
- 4.2.11 - StringToDoubleAddress()
- 4.2.12 - StringToConstant()
- 4.2.13 - ErrorToString()
- 4.2.14 - GetDriverVersion()
- 4.2.15 - TCVoltsToTemp()
- 4.2.16 - ResetLabJack()
- 4.2.17 - eAIN()
- 4.2.18 - eDAC()
- 4.2.19 - eDI()
- 4.2.20 - eDO()
- 4.2.21 - eTCConfig()
- 4.2.22 - eTCValues()
- 4.3 - Example Pseudocode
- 4.3.1 - Open
- 4.3.2 - Configuration
- 4.3.3 - Analog Inputs
- 4.3.4 - Analog Outputs
- 4.3.5 - Digital I/O
- 4.3.6 - Timers & Counters
- 4.3.7 - Stream Mode
- 4.3.8 - Raw Output/Input
- 4.3.9 - Easy Functions
- 4.3.10 - SPI Serial Communication
- 4.3.11 - I²C Serial Communication
- 4.3.12 - Asynchronous Serial Communication
- 4.3.13 - Watchdog Timer
- 4.3.14 - Miscellaneous
- 4.4 - Errorcodes
- 5 - Low-level Function Reference
- 5.1 - General Protocol
- 5.2 - Low-Level Functions
- 5.2.1 - Bad Checksum
- 5.2.2 - ConfigU3
- 5.2.3 - ConfigIO
- 5.2.4 - ConfigTimerClock
- 5.2.5 - Feedback
- 5.2.5.1 - AIN: IOType = 1
- 5.2.5.2 - WaitShort: IOType=5
- 5.2.5.3 - WaitLong: IOType=6
- 5.2.5.4 - LED: IOType=9
- 5.2.5.5 - BitStateRead: IOType=10
- 5.2.5.6 - BitStateWrite: IOType=11
- 5.2.5.7 - BitDirRead: IOType=12
- 5.2.5.8 - BitDirWrite: IOType=13
- 5.2.5.9 - PortStateRead: IOType=26
- 5.2.5.10 - PortStateWrite: IOType=27
- 5.2.5.11 - PortDirRead: IOType=28
- 5.2.5.12 - PortDirWrite: IOType=29
- 5.2.5.13 - DAC# (8-bit): IOType=34,35
- 5.2.5.14 - DAC# (16-bit): IOType=38,39
- 5.2.5.15 - Timer#: IOType=42,44
- 5.2.5.16 - Timer#Config: IOType=43,45
- 5.2.5.17 - Counter#: IOType=54,55
- 5.2.5.18 - Buzzer: IOType=63
- 5.2.6 - ReadMem (ReadCal)
- 5.2.7 - WriteMem (WriteCal)
- 5.2.8 - EraseMem (EraseCal)
- 5.2.9 - Reset
- 5.2.10 - StreamConfig
- 5.2.11 - StreamStart
- 5.2.12 - StreamData
- 5.2.13 - StreamStop
- 5.2.14 - Watchdog
- 5.2.15 - SPI
- 5.2.16 - AsynchConfig
- 5.2.17 - AsynchTX
- 5.2.18 - AsynchRX
- 5.2.19 - I2C
- 5.2.20 - SHT1X
- 5.3 - Errorcodes
- Appendix A - Specifications
- Appendix B - Enclosure and PCB Drawings
- Frequency List for U3 Timer Mode 7
- UD Driver for Windows with U3 Quick Reference
- U3 Base Class for Linux
- U3 Firmware Revision History
- U6
- Start with the UD Driver
- User's Guide
- 1 - Installation on Windows
- 2 - Hardware Description
- 2.1 - USB
- 2.2 - Power and Status LED
- 2.3 - GND and SGND
- 2.4 - VS
- 2.5 - 10UA and 200UA
- 2.6 - AIN
- 2.6.1 - Channel Numbers
- 2.6.2 - Converting Binary Readings to Voltages
- 2.6.3 - Typical Analog Input Connections
- 2.6.3.1 - Signal from the LabJack
- 2.6.3.2 - Unpowered Isolated Signal
- 2.6.3.3 - Singal Powered By the LabJack
- 2.6.3.4 - Signal Powered Externally
- 2.6.3.5 - Amplifying Small Signal Voltages
- 2.6.3.6 - Signal Voltages Beyond ±10 Volts (and Resistance Measurement)
- 2.6.3.7 - Measuring Current (Including 4-20 mA) with a Resistive Shunt
- 2.6.3.8 - Floating/Unconnected Inputs
- 2.6.4 - Internal Temperature Sensor
- 2.7 - DAC
- 2.8 - Digital I/O
- 2.9 - Timers/Counters
- 2.9.1 - Timer Mode Descriptions
- 2.9.1.1 - PWM Output (16-Bit, Mode 0)
- 2.9.1.2 - PWM Output (8-Bit, Mode 1)
- 2.9.1.3 - Period Measurement (32-Bit, Modes 2 & 3)
- 2.9.1.4 - Duty Cycle Measurement (Mode 4)
- 2.9.1.5 - Firmware Counter Input (Mode 5)
- 2.9.1.6 - Firmware Counter Input With Debounce (Mode 6)
- 2.9.1.7 - Frequency Output (Mode 7)
- 2.9.1.8 - Quadrature Input (Mode 8)
- 2.9.1.9 - Timer Stop Input (Mode 9)
- 2.9.1.10 - System Timer Low/High Read (Modes 10 & 11)
- 2.9.1.11 - Period Measurement (16-Bit, Modes 12 & 13)
- 2.9.2 - Timer Operation/Performance Notes
- 2.9.1 - Timer Mode Descriptions
- 2.10 - SPC (or VSPC)
- 2.11 - DB37
- 2.12 - DB15
- 2.13 - OEM Connector Options
- 3 - Operation
- 4 - LabJackUD High-Level Driver
- 4.1 - Overview
- 4.2 - Function Reference
- 4.2.1 - ListAll()
- 4.2.2 - OpenLabJack()
- 4.2.3 - eGet() and ePut()
- 4.2.4 - eAddGoGet()
- 4.2.5 - AddRequest()
- 4.2.6 - Go()
- 4.2.7 - GoOne()
- 4.2.8 - GetResult()
- 4.2.9 - GetFirstResult() and GetNextResult()
- 4.2.10 - DoubleToStringAddress()
- 4.2.11 - StringToDoubleAddress()
- 4.2.12 - StringToConstant()
- 4.2.13 - ErrorToString()
- 4.2.14 - GetDriverVersion()
- 4.2.15 - TCVoltsToTemp()
- 4.2.16 - ResetLabJack()
- 4.2.17 - eAIN()
- 4.2.18 - eDAC()
- 4.2.19 - eDI()
- 4.2.20 - eDO()
- 4.2.21 - eTCConfig()
- 4.2.22 - eTCValues()
- 4.3 - Example Pseudocode
- 4.3.1 - Open
- 4.3.2 - Configuration
- 4.3.3 - Analog Inputs
- 4.3.4 - Analog Outputs
- 4.3.5 - Digital I/O
- 4.3.6 - Timers & Counters
- 4.3.7 - Stream Mode
- 4.3.8 - Raw Output/Input
- 4.3.9 - Easy Functions
- 4.3.10 - SPI Serial Communication
- 4.3.11 - I²C Serial Communication
- 4.3.12 - Asynchronous Serial Communication
- 4.3.13 - Watchdog Timer
- 4.3.14 - Miscellaneous
- 4.4 - Errorcodes
- 5 - Low-level Function Reference
- 5.1 - General Protocol
- 5.2 - Low-Level Functions
- 5.2.1 - Bad Checksum
- 5.2.2 - ConfigU6
- 5.2.3 - ConfigIO
- 5.2.4 - ConfigTimerClock
- 5.2.5 - Feedback
- 5.2.5.1 - AIN: IOType = 1
- 5.2.5.2 - AIN24: IOType = 2
- 5.2.5.3 - AIN24AR: IOType = 3
- 5.2.5.4 - WaitShort: IOType=5
- 5.2.5.5 - WaitLong: IOType=6
- 5.2.5.6 - LED: IOType=9
- 5.2.5.7 - BitStateRead: IOType=10
- 5.2.5.8 - BitStateWrite: IOType=11
- 5.2.5.9 - BitDirRead: IOType=12
- 5.2.5.10 - BitDirWrite: IOType=13
- 5.2.5.11 - PortStateRead: IOType=26
- 5.2.5.12 - PortStateWrite: IOType=27
- 5.2.5.13 - PortDirRead: IOType=28
- 5.2.5.14 - PortDirWrite: IOType=29
- 5.2.5.15 - DAC# (8-bit): IOType=34,25
- 5.2.5.16 - DAC# (16-bit): IOType=38,39
- 5.2.5.17 - Timer#: IOType=42.44,46,48
- 5.2.5.18 - Timer#Config: IOType = 43, 45, 47, 49
- 5.2.5.19 - Counter#: IOType = 54, 55
- 5.2.6 - ReadMem (ReadCal)
- 5.2.7 - WriteMem (WriteCal)
- 5.2.8 - EraseMem (EraseCal)
- 5.2.9 - SetDefaults (SetToFactoryDefaults)
- 5.2.10 - ReadDefaults (ReadCurrent)
- 5.2.11 - Reset
- 5.2.12 - StreamConfig
- 5.2.13 - StreamStart
- 5.2.14 - StreamData
- 5.2.15 - StreamStop
- 5.2.16 - Watchdog
- 5.2.17 - SPI
- 5.2.18 - AsynchConfig
- 5.2.19 - AsynchTX
- 5.2.20 - AsynchRX
- 5.2.21 - I2C
- 5.2.22 - SHT1X
- 5.3 - Errorcodes
- 5.4 - Calibration Constants
- Appendix A - Specifications
- Appendix B - Noise and Resolution Tables
- Appendix C - Enclosure and PCB Drawings
- U6 Dimension Drawing
- U6 Firmware Revision History
- UE9
- Start with the Universal Driver
- User's Guide
- 1 - Installation on Windows
- 2 - Hardware Description
- 2.1 - USB
- 2.2 - Ethernet
- 2.3 - Vext (Screw Terminals and Power Jack)
- 2.4 - Comm and Control LEDs
- 2.5 - GND and SGND
- 2.6 - Vs
- 2.7 - AIN
- 2.7.1 - Channel Numbers
- 2.7.2 - Converting Binary Readings to Voltages
- 2.7.3 - Typical Analog Input Connections
- 2.7.3.1 - Signal from the LabJack
- 2.7.3.2 - Unpowered Isolated Signal
- 2.7.3.3 - Signal Powered by the LabJack
- 2.7.3.4 - Signal Powered Externally
- 2.7.3.5 - Amplifying Small Signal Voltages
- 2.7.3.6 - Signal Voltages Beyond ±5 Volts (and Resistance Measurement)
- 2.7.3.7 - Measuring Current (Including 4-20 mA) with a Resistive Shunt
- 2.7.3.8 - Floating/Unconnected Inputs
- 2.7.4 - Internal Temperature Sensor
- 2.8 - DAC
- 2.9 - Digital I/O
- 2.10 - Timers/Counters
- 2.10.1 - Timer Mode Descriptions
- 2.10.1.1 - PWM Output (16-Bit, Mode 0)
- 2.10.1.2 - PWM Output (8-Bit, Mode 1)
- 2.10.1.3 - Period Measurement (32-Bit, Modes 2 & 3)
- 2.10.1.4 - Duty Cycle Measurement (Mode 4)
- 2.10.1.5 - Firmware Counter Input (Mode 5)
- 2.10.1.6 - Firmware Counter Input With Debounce (Mode 6)
- 2.10.1.7 - Frequency Output (Mode 7)
- 2.10.1.8 - Quadrature Input (Mode 8)
- 2.10.1.9 - Timer Stop Input (Mode 9)
- 2.10.1.10 - System Timer Low/High Read (Modes 10 & 11)
- 2.10.1.11 - Period Measurement (16-Bit, Modes 12 & 13)
- 2.10.2 - Timer Operation/Performance Notes
- 2.10.1 - Timer Mode Descriptions
- 2.11 - SCL and SDA (or SCA)
- 2.12 - DB37
- 2.13 - DB15
- 2.14 - OEM Connector Options
- 3 - Operation
- 4 - LabJackUD High-Level Driver
- 4.1 - Overview
- 4.2 - Function Reference
- 4.2.1 - ListAll()
- 4.2.2 - OpenLabJack()
- 4.2.3 - eGet() and ePut()
- 4.2.4 - eAddGoGet()
- 4.2.5 - AddRequest()
- 4.2.6 - Go()
- 4.2.7 - GoOne()
- 4.2.8 - GetResult()
- 4.2.9 - GetFirstResult() and GetNextResult()
- 4.2.10 - DoubleToStringAddress()
- 4.2.11 - StringToDoubleAddress()
- 4.2.12 - StringToConstant()
- 4.2.13 - ErrorToString()
- 4.2.14 - GetDriverVersion()
- 4.2.15 - TCVoltsToTemp()
- 4.2.16 - ResetLabJack()
- 4.2.17 - eAIN()
- 4.2.18 - eDAC()
- 4.2.19 - eDI()
- 4.2.20 - eDO()
- 4.2.21 - eTCConfig()
- 4.2.22 - eTCValues()
- 4.3 - Example Pseudocode
- 4.3.1 - Open
- 4.3.2 - Configuration
- 4.3.3 - Analog Inputs
- 4.3.4 - Analog Outputs
- 4.3.5 - Digital I/O
- 4.3.6 - Timers & Counters
- 4.3.7 - Stream Mode
- 4.3.8 - Raw Output/Input
- 4.3.9 - Easy Functions
- 4.3.10 - SPI Serial Communication
- 4.3.11 - I²C Serial Communication
- 4.3.12 - Asynchronous Serial Communication
- 4.3.13 - Watchdog Timer
- 4.3.14 - Miscellaneous
- 4.4 - Errorcodes
- 5 - Low-level Function Reference
- 5.1 - General Protocol
- 5.2 - Comm Functions
- 5.3 - Control Functions
- 5.3.1 - BadChecksum
- 5.3.2 - ControlConfig
- 5.3.3 - Feedback (and FeedbackAlt)
- 5.3.4 - SingleIO
- 5.3.5 - TimerCounter
- 5.3.6 - StreamConfig
- 5.3.7 - StreamStart
- 5.3.8 - StreamData
- 5.3.9 - StreamStop
- 5.3.10 - ReadMem
- 5.3.11 - WriteMem
- 5.3.12 - EraseMem
- 5.3.13 - WatchdogConfig
- 5.3.14 - WatchdogRead
- 5.3.15 - Reset
- 5.3.16 - SPI
- 5.3.17 - AsynchConfig
- 5.3.18 - AsynchTX
- 5.3.19 - AsynchRX
- 5.3.20 - I²C
- 5.3.21 - SHT1X
- 5.3.22 - StreamDAC
- 5.4 - Low-Level Errorcodes
- 5.5 - Modbus
- Appendix A - Specifications
- C Native TCP Example
- Modbus TCP Example
- Calibration App
- UE9 Ethertest
- LabVIEW Native TCP Example
- PocketPC Native TCP Example
- Wireless data acquisition
- UD Driver for Windows Quick Reference
- UE9 Firmware Revision History
- Software Options
- Installers and Drivers
- Applications
- Programming
- DAQFactory
- CloudDot
- U3
- U12
- U12 OEM PH/NTH Dimension Drawings
- U12 Setup V1.21
- U12 Quickstart Guide
- U12 User's Guide
- Hardware Troubleshooting
- Win 98 SE HID
- U12 Example Code
- DASYLab Info
- Delphi Example
- Delphi IO Example
- Excel Example
- Java Example
- LabJack DotNet
- LabVIEW
- LabWindows/CVI
- MATLAB
- Perl
- PowerBASIC Example
- Python Example
- TestPoint Example
- VC6 Simple Example
- VC6 Stream Example
- Borland C Builder
- Dev-C++ Example
- Visual C++ OCX
- Visual C++ DLL
- Visual Basic 6 (VB6)
- VB6 DirectDLL Examples
- C Bit Operations
- VEE Examples
- LJsimplelog
- LJstream1
- LJstream2
- EEPROM Example
- SPI Example
- UD Series
- Accessories
- CB15 Datasheet
- CB25 Datasheet
- CB37 V1.2 Datasheet
- CB37 V2.1 Datasheet
- DCA-10 Datasheet
- EB37 Datasheet
- EI-1022 Datasheet
- EI-1034 Datasheet
- EI-1040 Datasheet
- EI-1050 Datasheet
- EI-1050 Utility for Windows
- LJTick-CurrentShunt Datasheet
- LJTick-DAC Datasheet
- LJTick-DAC Testing Utility
- LJTick-Divider Datasheet
- LJTick-InAmp Datasheet
- LJTick-Proto Datasheet
- LJTick-RelayDriver Datasheet
- RB12 Datasheet
- RB16 Datasheet and Schematic
- CloudDot
- App Notes
- Python
- Linux and Mac OS X drivers
- FAQ
- Modbus
- Firmware
- SkyMote
Search
Testimonials
-
If I have opportunity to recommend your company I most certainly will. I appreciate your hard work on our behalf.—Dawn, Materials Manager, Technology Brewing Corporation
Comments
windows 7?
Hello,
software installer claims that it may not be installed in earlier windows versions, but I*m running windows 7
Would be nice to have either a ready to use ubuntu or windows 7 version to log data.
thanks a lot
It should work on Windows 7
This installer works with Windows 7. Are you getting some error message when you try to install it? Are you on 32 or 64 bit Windows?
Once installed, we provide lots of examples for many programming languages. You can find those over in the Programming section.
On Linux, use the Exodriver as described in the Linux and Mac OS X Driver section.
If you're writing cross-platform code, I would recommend that you look at LabJackPython. It provides a nice, high-level interface to your devices that is platform independent.