Skip to Navigation

DAQFactory

Print pagePrint page Print allPrint all Export allExport all

DAQFactory is measurement and automation software from AzeoTech.  The free Express version of DAQFactory works with the U3/U6/UE9/U12. To get DAQFactory Express, download the normal DAQFactory Pro Trial from AzeoTech, and after 25 days it turns into Express.

DAQFactory allows non-programmers to make custom applications.  It is easy to collect input data, convert to engineering units, display it, and log it to file, without any programming (see the quick tutorial below).  Scripting is also supported so you can do advanced applications with control and automatic setting of outputs.  For more information, or to download, go to daqexpress.com.  For support, use AzeoTech's forum.

 

tags:

Comments

#1

Submitted by mhopeng (not verified) on Wed, 2012-07-11 04:15.

FYI, DAQFactory is Windows-only.

#2

Submitted by PRL (not verified) on Tue, 2012-07-03 06:44.

During creating an analog input channel in DAQ factory when Labjack U6 is connected to windows an alert is popping up.It reads Labjack not found.Why is it so? I don't understand.Can you just give a solution for this?

Thank you.

#3

Submitted by LabJack Support on Tue, 2012-07-03 11:06.

Does the U6 work properly in the test panel in LJControlPanel?

Make sure LJControlPanel and any other U6 related software is all closed before you run DAQFactory.

I would continue this discussion in Section 2 of the DF-LJ App Guide or on the LabJack Forum.

#4

Submitted by PRL (not verified) on Wed, 2012-07-04 06:15.

Okay I got it corrected.Then when should I use LJControlPanel and U6 related software?

Thank You.

#5

Submitted by LabJack Support on Thu, 2012-07-05 10:06.

There are various reasons to use different software, but just keep in mind that you can only use 1 program at a time.  You might run LJControlPanel for troubleshooting or configuration, but then make sure you close it before you run another program such as LJLogUD or DAQFactory.