The U6 enclosure is the same as the UE9 enclosure, but without the Ethernet opening and external power supply openings, so refer to Appendix C of the UE9 User's Guide.
The square holes on the back of the enclosure are for DIN rail mounting adapters (Tyco part #TKAD).
CAD drawings of the U6 attached to the bottom of this page (DWG, DXF, IGES, STEP).
The team at LabJack is driven to make measurement and automation simple and affordable. Located in Lakewood, Colorado, LabJack Corporation builds great hardware and software for industry, government, and education.
LabJack writes drivers for Windows, Linux, and Mac OS X, plus example code in dozens of languages. With LabJack's CloudDot online service, it's easy to monitor and control via the web.
Have a question or problem? LabJack engages in active customer support. You can find answers in the support area and FAQ, or contact us so we can help.
Print page
Export all
Comments
#1
Looking for I/O screw terminal table for U6 device...
Found it for UE9...but we're going to use the U6......
Thanks
#2
I am not sure what you are asking about. Perhaps point us to the UE9 information you found that is what you need for the U6.
#3
http://labjack.com/support/ue9/users-guide/appendix-c
in second drawing...the screw terminals identities are labeled...
need same for U6
#4
OK. I don't know if the silk-screen is shown in the CAD drawings, but you can see them in a picture of the enclosure lid. They are the same as the UE9 except for the top group which is 200UA/10UA/SGND/SPC.