Skip to Navigation

3.9 - LJSHTmulti

Print pagePrint page Print allPrint all Export allExport all

Displays readings from up to 20 EI-1050 digital temperature/humidity probes connected to a single LabJack U12.


Figure 3-16. LJSHTmulti

Figure 3-16 shows the LJSHTmulti window:

  • Enable Line: Choose the LabJack U12 output used to control the enable line on each EI-1050 probe.
  • Force Software Communication: Forces software based SHT1X communication, even if the LabJack U12 firmware is V1.10 or higher.
  • Enable Delay: Adds a delay between each reading for testing purposes.

tags:

Comments

No comments yet. Speak up. We're listening.